Home Home Home

Roof Coatings & Cold Applied Adhesives - Water Based Coatings


Wite Brite® Coating

Wite Brite® Elastomeric Coating is a 100% acrylic water–based VOC compliant reflective coating fortified with a concentrated level of titanium dioxide. This high quality white elastomeric weather resistant coating may be applied over most smooth or mineral surface asphalt roof systems and many other commercial roof surfaces. Consult with your SR Products representative for specific information.

BENEFITS:

  • Very good reflectivity.
  • Resists fatigue failures associated with normal thermal expansion and contraction, providing long-term protection and flexibility.
  • Non asbestos formula.
  • High percentage of polymer when compared to other similar materials.
  • Ready to apply.
  • Tested under ASTM D 6083 standard.


Wite Brite® Coating (Contrast)

Wite Brite® Elastomeric Coating - Contrast is a 100% acrylic water–based VOC compliant reflective coating fortified with a concentrated level of titanium dioxide. This acrylic coating is designed for use prior to application of Wite Brite Elastomeric Coating White.

BENEFITS:

  • Very good reflectivity.
  • Resists fatigue failures associated with normal thermal expansion and contraction, providing long-term protection and flexibility.
  • Non asbestos formula.
  • High percentage of polymer when compared to other similar materials.
  • Ready to apply.
  • Tested under ASTM D 6083 standard.


Wite Brite® Elastomeric Coating - Contrast FR

Wite Brite® Elastomeric Coating – Contrast FR is 100% acrylic water–based VOC compliant coating fortified with a concentrated level of titanium pigment. This high quality weather resistant formula provides a perfect base coat over a variety of roof surfaces. Consult with your SR Products representative for specific information.

BENEFITS:

  • Resists fatigue failures associated with normal thermal expansion and contraction, providing long-term protection and flexibility.
  • Does not contain asbestos.
  • Zinc ingredient inhibits rust.
  • Mold and mildew resistant formula.


Tarshield WB

Tarshield WB is a water-based blend of coal tar and proprietary polymer modifiers that provide a product suitable for application to membranes with slopes of 6” per foot (45%) or less. Tarshield WB is designed to have excellent adhesion to dry, clean, primed, uncontaminated substrates and to embedded gravel.

BENEFITS:

  • Cold-applied – thus eliminating open flames and kettles.
  • Contains no asbestos.
  • Compatible with asphalt and coal tar membranes when used as a surfacing or floodcoat.
  • Can be spray-applied for quicker, less labor intensive and easier application.
  • Very low odor.
  • Excellent flexibility – yet provides coal tar surfacing protection.
  • Can be applied on slopes from 1/8” to 6”.
  • Meets International Code Council (BOCA, SBCCI, ICBO) requirements as a surface coating over an asphalt or coal tar built-up roof assembly with a minimum slope of 1/8” – can eliminate the additional cost of tapered insulation.
  • Complies with current VOC regulations.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.
  • Meets requirements of Factory Mutual Research Corporation® Standard 4470.