Home Home Home

Roof Coatings & Cold Applied Adhesives - Asphalt, Urethane Roof Coatings & Adhesives


Base Sheet Adhesive

Base Sheet Adhesive is a cold-applied, asphalt/urethane moisture-cure adhesive. It is used to bond base sheets to approved insulation and/or structural concrete, and approved insulation to mechanically fastened base sheets. Base Sheet Adhesive’s unique chemistry provides quicker cure time at critical interfaces of BUR constructions to provide ultimate resistance to wind forces more rapidly than standard cold process BUR assemblies.

BENEFITS:

  • Cold applied – thus eliminating open flames and kettles.
  • Asbestos-free
  • Complies with all current VOC regulations including Ozone Transport Region (OTR) states.
  • Less sensitive to weather conditions than emulsion products.
  • Excellent adhesion.
  • Reduced cure time
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.
  • Asbestos-free


HK Aluminum Shield

HK Aluminum Shield is a highly reflective, leafing, asphalt-based paint that provides ultraviolet light resistance and weather protection to a variety of surfaces. HK Aluminum Shield is formulated with paint quality aluminum pigments for maximum reflectivity.

BENEFITS:

  • Contains no asbestos.
  • Formulated with paint quality pigments – providing exceptional reflectivity.
  • Excellent adhesion.
  • Good weatherability.
  • Meets or exceeds ASTM D 2824, Type I requirements..
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure.
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.
  • Saves energy by reducing under roof temperatures.
  • Solar reflectance and thermal emittance (emissivity) values in accordance with the Cool Roof Rating Council Product Rating.
  • Extends life cycle of surfaces by slowing UV degradation.
  • Energy Star compliant.


HK Aluminum Shield Fibrated

HK Aluminum Shield Fibrated combines selected asphalts, mineral fillers and refined aluminum to provide a tough, durable, weather resistant, reflective surface.

BENEFITS:

  • Contains no asbestos.
  • Highly reflective.
  • Excellent adhesion.
  • Good weatherability.
  • Meets or exceeds ASTM D 2824, Type III requirements.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure.
  • Saves energy by reducing roof surface temperature.
  • Extends life cycle of surfaces by slowing UV degradation.
  • Solar reflectance and thermal emittance (emissivity) values in accordance with the Cool Roof Rating Council Product Rating Program.
  • Meets requirements of Factory Mutual Research Corporation® Standard 4470.
  • Conforms to ASTM D 962 Type II.


HK Aluminum Shield Fibrated Premium

HK Aluminum Shield Fibrated Premium combines selected asphalts, mineral fillers and refined aluminum paste to provide a tough, durable, weather resistant, reflective surface.

BENEFITS:

  • Contains no asbestos.
  • Highly reflective.
  • Excellent adhesion.
  • Good weatherability.
  • Meets or exceeds ASTM D 2824, Type III requirements.
  • Saves energy by reducing roof surface temperature.
  • Extends life cycle of surfaces by slowing UV degradation.
  • Solar reflectance and thermal emittance (emissivity) values in accordance with the Cool Roof Rating Council Product Rating Program.
  • Conforms to ASTM D 962 Type II.


Multi-Ply Adhesive

Multi-Ply Adhesive is a cold-applied, premium quality interply and surface aggregate adhesive. Multi-Ply Adhesive, when used as an adhesive, penetrates each ply layer to create a fused, well-bonded roof system. Unlike hot-applied materials, rapid cooling, wind, and improper heating are not influencing factors during application.

BENEFITS:

  • Cold applied – thus eliminating open flames and kettles.
  • Asbestos-free
  • Complies with all current VOC regulations.
  • Easily spray-applied.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure
  • Less sensitive to weather conditions than emulsion products.
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.


Multi-Ply Adhesive SF

Multi-Ply Adhesive SF is a cold-applied, solvent-free, asphalt/urethane interply adhesive. It is used to bond fully coated base/ply sheets and modified bitumen membranes to construct multiple ply roof assemblies. Multi-Ply Adhesive SF meets VOC requirements in all jurisdictions, and is ideal for projects sensitive to solvent odor. The unique chemistry of Multi-Ply Adhesive SF provides faster cure time and maximum strength of the roof system compared to standard cold applied, solvent-based products.

BENEFITS:

  • No open flames, hot kettles, bitumen fumes or pungent solvent-odors.
  • Asbestos-free
  • Complies with all current VOC regulations.
  • Less sensitive to weather conditions than water or solvent-based products.
  • Rapid cure time.
  • More waterproofing and faster maximum system strength than standard cold-process roofing systems.
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.


Pika Ply MB Adhesive

Pika Ply MB Adhesive is an asphalt-based, cold-applied interply adhesive used to bond SBS modified bitumen membrane systems. It can be applied by spray or notched squeegee and is designed to adhere SBS modified bitumen sheet materials that do not have a burn-off film.

BENEFITS:

  • Cold applied – thus eliminating open flames and kettles.
  • Low odor
  • Asbestos-free
  • Provides excellent substrate adhesion and strong lap bond.
  • Meets or exceeds the lap shear requirements of ASTM D 3019
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure.
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.
  • Approved by Miami Dade County Building Code Compliance Department and Building Code Committee.


SuperiorFlex® Seal Max

SuperiorFlex® Seal Max is a "state of the art" two-component waterproofing and adhesive compound. SuperiorFlex® Seal Max's superior tensile strength and outstanding elongation combined with specified, high performance SR Base and ply sheets, create a unique and revolutionary waterproof membrane. SuperiorFlex® Seal Max is the strongest of our exceptional line of adhesive and waterproofing materials.

BENEFITS:

  • Excellent resistance to ponding conditions.
  • Provides exceptional resistance to thermal shock and movement.
  • Apply to either flat or sloped surfaces.
  • Unique mixture cures to a strong rubberized waterproof membrane.
  • Classified by Underwriters laboratories, Inc.® as to an external fire exposure only.
  • Approved by Factory Mutual Research Corporation® Standard 4470, Class I (A)-90.
  • Approved by the Miami Dade County Building Code Compliance Department and Building Code Committee.
  • Product designed to comply with the 2004 Florida Building Code, with 2006 Supplements, FL8077


SuperiorlFlex® Seal MG Plus

SuperiorFlex® Seal MG Plus is a thermoplastic, cold-applied rubber mastic designed for use as an interply adhesive for waterproofing a variety of structural surfaces.

BENEFITS:

  • Cures to a strong rubber-like material.
  • Designed to accommodate normal thermal movement.
  • Contains no asbestos.


SuperiorFlex® Seal Plus

SuperiorFlex® Seal Plus utilizes new, innovative technology to develop the most advanced polymer-enriched, fluid-applied membrane and waterproofing material. This state of the art technology, combined with our proprietary formulation, creates a tough elastomeric waterproofing material that exceeds the performance potential of most coal tar base and butyl compounds.

BENEFITS:

  • Excellent resistance to ponding water.
  • Resists bonding failures associated with thermal movement.
  • May be applied to flat and sloped surfaces.
  • No running or sagging at elevated roof temperatures.


Tarshield

Tarshield is a blend of coal tar, proprietary polymer modifiers, and non-asbestos fibers which provides a product suitable for application to membranes with slopes of ½” (4.17%) or less. Tarshield is designed to have excellent adhesion to dry, clean, uncontaminated substrates, and for adhesion of gravel surfacing.

BENEFITS:

  • Cold-applied – thus eliminating open flames and kettles.
  • Contains no asbestos.
  • Complies with current VOC regulations.
  • Less sensitive to weather conditions than emulsion products.
  • Compatible with asphalt and coal tar membranes when used as a surfacing or floodcoat.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.
  • Meets requirements of Factory Mutual Research Corporation® Standard 4470.
  • Meets International Code Council (BOCA, SBCCI, ICBO) requirements as a surface coating over an asphalt or coal tar built-up roof assembly with a minimum slope of 1/8” – often eliminating the additional cost of tapered insulation.