Home Home Home

Flashing and Edge Termination Metals - Fascia


Storm Defender Fascia 1500

A three-part fascia assembly designed for single roofs. Designed to secure the roof membrane in high wind conditions. The fascia system consists of a continuous galvanized steel water dam spring clip, exterior fascia cover, concealed joint cover, and corrosion resistant fasteners.

BENEFITS:

  • Secures the edge of the roof membrane and the top of wall from moisture entry.
  • Snap on/free floating cover design that allows for the most thermal expansion and contraction forces that create oil canning of cover.
  • Concealed corrosion resistance factory supplied fasteners.
  • Tested for wind uplift resistance per ANSI/SPRI ES-1.*
  • Pre-punched fastening holes provided in the water dam allows for correct fastener placement* and proper thermal movement of material.
  • Factory-fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance and eliminate field fabrication for time and labor savings.
  • Products designed to be heavy-duty, commercial quality to ensure water control under the most difficult conditions.

* Reference specific product date for approvals.



Storm Defender Fascia 5000

A three-part fascia assembly designed for built-up and modified bitumen roofs. Designed to secure the roof membrane in high wind conditions. The fascia system consists of a continuous galvanized steel water dam spring clip, exterior fascia cover, concealed joint cover, and corrosion resistant fasteners.

BENEFITS:

  • Secures the edge of the roof membrane and the top of wall from moisture entry.
  • Snap on/free floating cover design that allows for the most thermal expansion and contraction forces that create oil canning of cover.
  • Concealed corrosion resistance factory supplied fasteners.
  • Tested for wind uplift resistance per ANSI/SPRI ES-1.*
  • Pre-punched fastening holes provided in the water dam allows for correct fastener placement* and proper thermal movement of material.
  • Factory-fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance and eliminate field fabrication for time and labor savings.
  • Products designed to be heavy-duty, commercial quality to ensure water control under the most difficult conditions.

* Reference specific product date for approvals.



Storm Defender Fascia 6000

A two-part fascia assembly designed for built-up, modified bitumen, smooth and granule surface roofs. Designed to secure the roof membrane in high wind conditions. The fascia system consists of a continuous galvanized steel wind cleat, exterior fascia cover, spring clip and corrosion resistant fasteners.

BENEFITS:

  • Formed cant assembly allows for installation with one fastener per 12” on center. This allows for faster and easier installation
  • Concealed corrosion resistance factory supplied fasteners.
  • Tested for wind uplift resistance per ANSI/SPRI ES-1.*
  • Pre-punched fastening holes provided in the wind cleat and the roof flange allows for correct fastener placement* and proper thermal movement of material.
  • Products designed to be heavy-duty, commercial quality to ensure water control under the most difficult conditions.

* Reference specific product date for approvals.



Storm Defender Fascia 7000

A two-part fascia assembly designed for built-up, modified bitumen, smooth and granule surface roofs. Designed to secure the roof membrane in high wind conditions. The fascia system consists of a continuous galvanized steel wind cleat, exterior fascia cover, concealed joint cover, and corrosion resistant fasteners.

BENEFITS:

  • The articulated roof flange permits the roof membrane to be sealed to the flashing membrane with the edge metal flange securely attached to both. This exclusive SR Products design protects the edge of the roof membrane and the top of wall from moisture entry.
  • Concealed corrosion resistance factory supplied fasteners.
  • Tested for wind uplift resistance per ANSI/SPRI ES-1.*
  • Pre-punched fastening holes provided in the wind cleat and the roof flange allows for correct fastener placement* and proper thermal movement of material.
  • Factory-fabricated accessories provide a cleaner, more aesthetically pleasing appearance and eliminate field fabrication for time and labor savings.
  • Products designed to be heavy-duty, commercial quality to ensure water control under the most difficult conditions.

* Reference specific product date for approvals.