Home Home Home

Modified Bitumen Roof Membranes - SBS Modified Bitumen

SBS Modified Bitumen Membranes


SR STCK-QUIK HTP

SR STCK-QUIK HTP ice and water shield is an SBS (Styrene-Butadiene-Styrene) modified self-adhering membrane reinforced with non-woven fiberglass mat for added strength and durability. A textured film surface provides improved traction while working on the roof and is designed for use in metal roof system applications.

BENEFITS:

  • SBS modified asphalt softening point (ASTM D 36) is 250 °F.
  • Skid resistant plastic film surface.
  • Ease of installation as a result of silicone treated split back release film.
  • May be installed directly to concrete, gypsum, plywood and wood composition board.
  • Self-seals around nails.
  • Excellent low temperature performance.


SR SuperiorPly SAM II

SR SuperiorPly SAM II is a premium self-adhered roofing membrane comprised of a high performance non-woven polyester mat and select asphalt. The top surface is coated with polymer modified asphalt and a black grit granule but must be coated with the Wite Brite Elastomeric Coating and SR Poly Plus 40 coating system. The bottom is coated with an aggressive self-adhesive compound. The bottom side of the sheet has a split release film for easy installation. On the top side, the 6” selvage edge is covered with a poly film that is removed when the side laps are mated. SR SuperiorPly SAM II meets ASTM D 1970 requirements.

BENEFITS:

  • Suitable for new construction, re-roofing and BUR repair.
  • Low temperature flexibility, puncture and tear resistant.
  • Poly release film on side laps to insure good adhesion.
  • Split release film on back.
  • Does not contain asbestos.


SR SuperiorPly SAP II

SR SuperiorPly SAP II is a premium self-adhered base and ply roofing membrane comprised of a high performance non-woven polyester mat and select asphalt designed for horizontal applications. The top surface is coated with polymer modified asphalt while the bottom is coated with an aggressive self-adhesive compound. SR SuperiorPly SAP II is finished with a polyolein film with lay lines on the top surface and a split release film on the bottom surface. SR SuperiorPly SAP II meets ASTM D 1970 requirements.

BENEFITS:

  • Suitable for new construction, re-roofing and BUR repair.
  • Low temperature flexibility, puncture and tear resistant.
  • Poly release film on side laps to insure good adhesion.
  • Split release film on back.
  • Does not contain asbestos.