Home Home Home

Modified Bitumen Roof Membranes - SBS Heat Welded

SBS Heat Welded Membranes


Pars Alt 190TG SBS

Pars Alt 190TG SBS is is a smooth surfaced, premium SBS (Styrene-Butadiene-Styrene) torch applied membrane. Manufactured with a non-woven polyester mat that is saturated and coated with a premium quality, asphaltic bitumen and SBS elastomers for a highly durable, flexible and easily maintainable membrane. It is designed for use as a base sheet or an interply sheet in modified bitumen SBS torch applied roof systems.

BENEFITS:

  • May be applied by torch welding methods.
  • Weather-resistant for long-term protection.
  • Very good cold weather performance.
  • Exceeds ASTM D 6164, Type I, Grade (S) requirements.


Pika Ply 180 (FS)

Pika Ply 180 (FS) is a 2.2 mm thick, polyester reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with polypropylene burn-off film top surface and sanded underside. This product is designed to be fully adhered with hot applied adhesives while providing a top surface for hot-air or torch bonding of an additional SBS sheet.

BENEFITS:

  • Weather resistant for long-term protection.
  • Excellent cold weather performance.
  • Exceeds ASTM D 6164, Type I, Grade (S) requirements.
  • Contains no asbestos.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.
  • Approved by the Miami Dade County Building Code Compliance Department and Building Code.


Pika Ply 250 S (TG)

Pika Ply 250 S (TG) is a fire-rated, 4.0 mm thick, polyester reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with polypropylene burn-off film on both top and bottom surfaces to aid in proper application. This sheet is designed to be applied using torch welding methods.

BENEFITS:

  • Applied by torch welding methods.
  • Weather resistant for long-term protection.
  • Very good cold weather performance.
  • Exceeds ASTM D 6164, Type I, Grade (S) requirements.
  • Contains no asbestos.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.
  • Approved by the Miami Dade County Building Code Compliance Department and Building Code.


Pika Ply SS-3P (TG)

Pika Ply SS-3P (TG) is a fire-rated, 3.0 mm thick, polyester reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with polypropylene burn-off film on both top and bottom surfaces to aid in proper application. This sheet is designed to be applied using torch welding methods.

BENEFITS:

  • Applied by torch welding methods.
  • Weather resistant for long-term protection.
  • Very good cold weather performance.
  • Exceeds ASTM D 6164, Type I, Grade (S) requirements.
  • Contains no asbestos.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.
  • Approved by Factory Mutual Research Corporation® per FM Standard 4470.
  • Approved by the Miami Dade County Building Code Compliance Department and Building Code.


SRM Ply 90 TG

SRM PLY 90 TG is a fire-rated, 3.0 mm thick, fiberglass reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with a smooth top surface and a polypropylene burn-off film underside. This sheet is designed to be applied using torch welding methods. It is designed as an interply sheet or a base ply in a modified system.

BENEFITS:

  • May be applied by hot-mopping with asphalt adhesives.
  • Weather-resistant for long-term performance.
  • Very good cold weather performance.
  • Uniform layer of protection provided by quality control during manufacture.
  • Exceeds ASTM D 6163, Type I, Grade (S) requirements.


SR MB S42P S HWLD

SR MB S42P S HWLD is a smooth surfaced, SBS modified, 165 mils (4.2 mm) thick, premium SBS (Styrene-Butadiene-Styrene) torch applied membrane made with a polyester reinforcement for tear strength and puncture resistance. SR MB S42P S HWLD is a flexible and easily maintainable membrane. It is designed for use as a base sheet in modified bitumen and built-up roof systems or as a cap sheet when surfaced with a flood coat of asphalt and gravel.

BENEFITS:

  • Weather resistant for long-term protection.
  • Contains no asbestos.
  • Applicable Standard ASTM D 6164, Type I, Grade S.
  • Heat welded installation method.