Home Home Home

Modified Bitumen Roof Membranes - SBS Heat Welded

SBS Heat Welded Membranes


Pars Alt 190 FR TG SBS

Pars Alt 190 FR TG SBS is a fire-rated, 4.0 mm thick, polyester reinforced, styrene-butadiene-styrene (SBS) modified bitumen cap sheet with a granule top surface and a polypropylene burn-off film underside for proper application. This sheet is designed to be applied using torch welding methods.

BENEFITS:

  • May be applied by either hot air or torch welding methods.
  • Weather-resistant for long-term protection.
  • Very good cold weather performance.
  • Exceeds ASTM D 6164, Type I, Grade (G) requirements.


Pika Ply 250 GR FR (TG)

Pika Ply 250 GR FR (TG) is 160 mils (4 mm) thick, granule surfaced, fire-rated membrane formulated with high quality asphalt modified with styrene-butadiene-styrene (SBS) copolymer. Reinforced with a core of tough nonwoven polyester, this unique blend of materials allows the membrane to perform under extreme stress conditions, maintaining its flexibility and seam integrity. Pika Ply 250 GR FR (TG) Is designed to be applied using torch welding methods in applications requiring superior performance and wherever hot mop installation is impractical, undesirable, or not permitted.

BENEFITS:

  • Applied by torch welding methods.
  • Excellent elongation properties.
  • Very good cold weather performance.
  • Uniform layer of protection provided by quality control during manufacturing.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.
  • Contains no asbestos.
  • Exceeds ASTM D 6164, Type II, Grade (G) requirements.
  • Meets requirements of Factory Mutual Research Corporation® Standard 4470.
  • Approved by the Miami-Dade County Building Code Compliance Department and Building Code Committee.


Pika Ply MS-4 (TG)

Pika Ply MS-4 (TG) is a fire-rated, 4.0 mm thick, polyester reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with a granule top surface and a polypropylene burn-off film underside for proper application. This sheet is designed to be applied using heat welding methods.

BENEFITS:

  • May be applied by either hot air or torch welding methods.
  • Weather-resistant for long-term protection.
  • Very good cold weather performance.
  • Uniform layer of protection provided by quality control during manufacturing.
  • Exceeds ASTM D 6164, Type I, Grade (G) requirements.
  • Contains no asbestos.
  • Classified by Underwriters Laboratories, Inc.® as to an external fire exposure only.
  • Meets requirements of Factory Mutual Research Corporation® Standard 4470.
  • Approved by the Miami-Dade County Building Code Compliance Department and Building Code Committee.


SRM Ply FR GR TG SBS

SRM Ply FR GR TG SBS is a fire-rated, 4 mm thick, fiberglass reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with a granule top surface and a polypropylene burn-off film underside. This sheet is designed to be applied using torch welding methods.

BENEFITS:

  • May be applied by hot-mopping with asphalt adhesives.
  • Weather-resistant for long-term performance.
  • Very good cold weather performance.
  • Uniform layer of protection provided by quality control during manufacture.
  • Exceeds ASTM D 6163, Type I, Grade (G) requirements.